Production Shaper

Click here to view the full brochure for this machine

Guard, aluminum dust spout & hand brake are standard equipment

Northfield Production Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided.

Specifications

Diameter of Spindle (standard machine) 1"
Vertical Adjustment of Spindle 4-1/2"
Length of Spindle at Collar 5"
Size of Table 36" x 26"
Height of Table Top 36"
Spindle Speed 8,000 RPM
Spindle Rotation Counterclockwise
Size of Dust Spout 4" - 4" dust spout requires approx. 400 CFM air flow for dust collection
Horsepower 3, 5, 7-1/2, 10, 15 TEFC
Size of Throat Hole 4-1/2"
Floor Space 36 width x 36 deep
Domestic Shipping Weight 900 lbs.
Export Shipping Weight 1150 lbs.
Cubic Measure Export Boxed 59 cu. ft.
Voltages 208, 230/460, 575 3 ph 60 hz
 

Extras


  • K-50 fence with hold down springs
  • Micrometer adjust for K-50 fence
  • 3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles
  • 6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only
  • 8" spindle length 1-3/8, & 1-1/2 solid spindle
  • Reversing solid spindle with reversing switch
  • Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"
  • Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"
  • Detachable router top 1/2" hole
  • Collet spindle (3/4" max collet bore)
  • 6000 & 4000 RPM spindle speed
  • NEMA 12 electrics with fused disconnect
  • 24-volt push-button
  • 6" front & rear table extensions
  • Switch to disconnect power upon actuation of brake
  • Clockwise spindle rotation
  • Miter gauge with dovetail slot
  • Single phase 3, 5, 7-1/2" hp, 220-volt
  • Throat hole and plates available: 8", 6-1/2" and nested
  • 42" x 42" table
  • Digital read-out spindle position
  • Modifications to customer's order